Select Page
X

Tub/Shower Trim Kit for Moen in Chrome

Replacing the trim on your bathroom fixtures is an easy do-it-yourself project. This Danco Trim Kit for Moen Tub/Shower Faucets allows you to update without replacing the valve. It features compatibility and includes adapters to fit Moentrol and Posi-Temp cartridge style faucets. The Trim Kit offers you a choice of design between a clear acrylic handle and a chrome finished metal handle. The plastic construction provides durability while the stainless steel material provides reliable performance.

Model # 10001
Unavailable
Danco
2.33 out of 5 based on 3 customer ratings
3 customer reviews Write a review

Available at

Create a new project list

Product Description

Replacing the trim on your bathroom fixtures is an easy do-it-yourself project. This Danco Trim Kit for Moen Tub/Shower Faucets allows you to update without replacing the valve. It features compatibility and includes adapters to fit Moentrol and Posi-Temp cartridge style faucets. The Trim Kit offers you a choice of design between a clear acrylic handle and a chrome finished metal handle. The plastic construction provides durability while the stainless steel material provides reliable performance.

  • Durable plastic, acrylic and stainless steel construction
  • Replaces tub/shower valve trim
  • Includes adapters to fit most Moen tub/shower faucets
  • Compatible with Moentrol and Posi-Temp cartridge style faucets
    • Replaces Moentrol 220, 240, 2600 & 2700 series with and without diverters
    • Replaces Moen Posi-Temp series 2300 with and without diverters
  • Includes 1 clear acrylic handle and 1 chrome-finished metal handle
    • Metal handle used only for valves without diverters
    • Acrylic handle: 2.75 in. x 2.35 in. x 1.6 in.
    • Metal handle: 4 in. x 2-1/16 in. x 2-3/8 in.
  • Chrome finish will brighten your bathroom
  • Gives a clean and finished look to your tub/shower
  • Replaces existing kits 28951, 28951, 28961, 89273 and 89275
  • Installs with simple household tools making this an easy do-it-yourself project

Note: To properly install this product, you need a minimum of a 3-1/2 inch opening in the wall for the offset portion of the trim plate to sit back in, or else it will stick out from the wall.

Specifications

  • PKG Height (in.)10.75
  • PKG Width (in.)8.25
  • PKG Length (in.)3.81
  • PKG Weight (lb.)1.82
  • OEM BrandMoen
  • ApplicationTub / Shower
  • Product Height(in).7.2
  • Product Width(in).7.2
  • Product Length(in).0.00
  • Product Outer Diameter (in.)0.00
  • Product Inner Diameter (in.)0.00
  • MaterialPlastic
  • Product TypeTrim Kit

3 reviews for Tub/Shower Trim Kit for Moen in Chrome

Sort by
  1. 5 out of 5

    I bought a house where somebody had botched a previous handle replacement attempt. I took some photos to my local plumbing supply house and described the valve to them. They told me I had a Moen push-pull type B and sold me the proper repair kit. With the help of a friend w...Read More

  2. 1 out of 5

    I purcached the Danco level replacement for moen. I simply went fine but when I tried to adjust the temperature, the weight of the handle would bring it to neutral (straight down)

    • Danco

      Good Morning,
      Thank you for your feedback. If you have recently replaced the cartridge it may be that there is a lot of lubricant around the o-rings not allowing the o-rings to get enough friction. This can cause the handle to move to freely. Easiest fix is to switch to...Read More

  3. 1 out of 5

    Doesn’t work on my Moen unit. Screws were 1/2 inch too short for fastening round trim plate to valve. After getting screws that would work, the handle would only install with the valve stem pulled out to the “on” position, due to the physical dimensions of t...Read More

    • Jordan Marks

      Good Afternoon Thomas,
      Thank you for taking the time to let us know about your installation of the Universal Tub/Shower Trim Kit for Moen. We know it is frustrating to purchase a product and then the installation does not work as expected. The installation situation th...Read More

Add a review

How to video

  View Instructions 10001 Download Instructions

Step-by-step instructions

Leaky tub and shower faucets are not on our list of favorite things. But they're relatively simple to fix yourself. With a few tools and the right Danco replacement part, you can fix that leaky faucet yourself. Tools and supplies required: Phillips Screwdriver, Cartridge Puller, Pliers, Needle Nose Pliers, Fine Sandpaper or Steel Wool, Silicone Grease
1
step-1

The easiest way to remove the old Cartridge is to use a Cartridge Puller. Make sure to follow the instructions for the Cartridge Puller, which can be purchased at your local home improvement store. Because Cartridges are unique to specific type of Faucets, you will want to take your old Cartridge to your local home improvement store and use the Perfect Match locator system from Danco or use the online Stem Finder. This system makes it easy to find your replacement.

2
step-2

Next, remove the Temperature Limit Stop, Key Stop, Stop Tube, and the Trim Plate (as needed to access Cartridge).

3
step-3

Remove the Retainer Clip carefully as not to drop it behind wall.

4
step-4

The easiest way to remove the old Cartridge is to use a Cartridge Puller. Make sure to follow the instructions for the Cartridge Puller, which can be purchased at your local home improvement store. Because Cartridges are unique to specific type of Faucets, you will want to take your old Cartridge to your local home improvement store and use the Perfect Match locator system from Danco or use the online Stem Finder. This system makes it easy to find your replacement.

5
step-5

Using Silicone Grease, lubricate the inside of the Valve Body about 1”. Then lubricate the Exterior Rubber Components on the Cartridge with Silicone Grease as well.

6
step-6

Insert the new Cartridge, Hot inlet Left Side, Cold inlet Right Side into the Valve Body with the tab stamped “HC” on top and with the Stem Notch down.

7
step-7

Reinstall Trim Plate with original Screws.

8
step-8

Reinstall the Retainer Clip, Stop Tube, Key Stop, and the Temperature Limit Stop, in that order.

9
step-9

Slide the Handle onto the Stem or Handle Adapter onto the Stem. Do not use Handle Screws at this point. Turn the water supply back on and test for leaks and ensure the hot water temperature is adequate. Be sure not to exceed the maximum temperature allowed by local plumbing code. Finally, secure the Handle with the Set Screw and your project is complete.

California residents prop 65 warning This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

X