6 in. Decorative Tub Spout with Pull Up Diverter in Matte Black

Matte black is becoming the finish of choice especially when it comes to decor. Matte black can be naturally looked as modern but it works well as a transitional finish too, every space needs a little bit of black so adding in black hardware, faucets, and other fixtures is a great way to include this design staple into your space. Update your bathroom with the Danco Tub Spout with Diverter in Matte Black. Old worn out tub spouts have a tendency to erode and crack creating unwanted leaks. Replacing your dirty, dingy tub spout will help upgrade the look of your tub/shower and help prevent leaks which will save water and save you money. This tub spout is constructed from metal for strength and durability in your tub/shower. It features a 5-1/2 in. reach to provide an abundance of clearance space. This tub spout comes complete with adapters for a hassle-free installation.

Model # 11080

Description
Specifications
Reviews (1)
Installation & How to

Product Description

Ideal for replacing and updating your worn-out, non-functioning tub spout and the decorative design will give a fresh update to your bathtub
Designed to fit 1/2 in. Copper Pipe Slip Connection, 1/2 in. Male Threaded Connection with Short Stub-Out Connection, 1/2 in. Male Threaded Connection with Long Stub-Out and 3/4 in. NPT Male Threaded Connection
Comes with an adapter, O-ring, and plumber’s tape to ensure a snug, leak-free fit
Includes a diverter lift rod to allow water stream to flow though downward into the tub or upward into showerhead
Bathtub faucet spout has a 5-1/2 in. reach
NOTE FOR EXISTING BATHTUB SPOUT WITH MALE THREADED CONNECTIONS: For 1/2 inch Male Threaded Short Stub-out nipple make sure pipe stub-out is between 1/2 in. and 3/4 in. long; For 1/2 in. Male Threaded Long Stub-out nipple make sure pipe stub-out is between 3-3/4 in. and 4 in. long; For 3/4 in. NPT Male Threaded stub-out the threaded pipe stub-out must be 3/4 in and 1 in. long
Durable metal construction provides strength, longevity and will endure the rigors of everyday use
Matte gives black a warmer, inviting look to your interior design; it is modern, yet cozy and it is such a versatile finish that can go with any home design style

Specifications

PKG Height (in.)7.00
PKG Width (in.)7.85
PKG Length (in.)3.10
PKG Weight (in.)1.14
Product Height(in).3.00
Product Width(in).3.00
Product Length(in).6.25
OEM BrandUniversal
MaterialMetal
Product TypeTub Spout

1 review for 6 in. Decorative Tub Spout with Pull Up Diverter in Matte Black

Rated 1 out of 5
John Z – December 5, 2022
Absolutely horrible product unless you are willing to fix it yourself. Spout looks nice and is of decent quality don’t get me wrong BUT I had to drill a hole 180° from where the pre marked hole for retainer ring and screw is to get the o ring tight enough that it doesn&...Read More
Read Less

Add a review

How to video

Step-by-step instructions

Replacing a Tub Spout is an easy project that you can definitely handle yourself. It’s a great way to upgrade the look of your bathroom or to repair a spout that has seen better days. There are several different types of Tub Spouts. Here we are going to detail how to replace a ½” Copper Pipe Slip Connection, which is the most popular type of connection. For other connections, be sure to follow the manufacturer’s directions for installing your Tub Spout. Tools and supplies required: Phillips Screwdriver, Adjustable Wrench, Sandpaper (not included), Pipe Thread Tape (included)

Turning counterclockwise, remove the old Tub Spout. If your Tub Spout has a set screw holding it in place, be sure to remove that prior to rotating the Spout off. If your Tub Spout is hard to remove, you may need to use the end of a hammer or large wrench to help loosen while turning. Just insert the handle into the opening of the Tub Spout for leverage.

Measure the Stub Out Nipple length from the wall surface to the end of the Pipe. The Stub Out Nipple must be between 2” and 3” long. The end of the Stub Out Nipple should be even.

Use sandpaper to remove burrs and sharp edges from the end of pipe and to polish copper pipe surface to a smooth finish.

Unthread and remove Adapter with pre installed screw and Compression Washer from inside the back end of Extension Nipple. Then, slide Adapter with pre installed screw onto copper pipe with the threads facing away from the wall. The screw should be facing upward.

Apply a thin layer of silicone grease to the stub out nipple, then insert compression washer.

Thread (by hand) the Extension Nipple by turning it clockwise onto the Extension Nipple Adapter. This should be about 3.5 to 4 turns. Use an adjustable wrench or 1” wrench on the flat sides of the adapter to get an additional ½ turn. Note: it is okay to see a small gap of around 1/16" between the adapter and extension nipple.

Tighten the Adapter screw with Phillips screwdriver. Stop tightening when the screw head is near flush with the adapter. This would happen when meeting resistance on the screwdriver as torque is applied. Once the screw is tightened, the assembly should be fixed and unable to rotate on the copper pipe.

Apply a minimum 4 to 5 rounds of included thread tape onto the Extension Nipple external threads.

Thread (by hand) the tub spout by turning it clockwise onto the external threads of the Extension Nipple until the back of the tub spout meets the wall and the spout opening is pointed downward. Note: if there is a gap between the back of the tub spout and the tub wall, you may need to push the adapter assembly further back towards the wall. Loosen the Adapter screw and push the assembly towards the wall as needed. Then repeat steps 7 through 9.

Turn water on and test for leaks. If water is leaking from the rear of the Tub Spout, reinstall, as this could damage your wall.