Select Page
X

1.5 GPM Water Saving Dual Thread EZ Touch Faucet Aerator

This 1.5 GPM faucet aerator by Danco has innovative features. It has a push and flow button that regulates water usage and saves water consumption. The water automatically shuts off after 20 seconds of use so you do not waste water while brushing your teeth, washing hands or dishes. With a simple touch of a button and the water starts flowing again at the same temperature when paused. Dual threads fit 15/16 in.-27M or 55/64 in.-27F.

Model # 10490
Water Saving

Available at

Create a new project list

Product Description

This 1.5 GPM faucet aerator by Danco has innovative features. It has a push and flow button that regulates water usage and saves water consumption. The water automatically shuts off after 20 seconds of use so you do not waste water while brushing your teeth, washing hands or dishes. With a simple touch of a button and the water starts flowing again at the same temperature when paused. Dual threads fit 15/16 in.-27M or 55/64 in.-27F.

Fun Fact: Aerators limit water flow through the faucet allowing water use to be reduced compared to the same time flow without an aerator. In the case of hot water, because less water is used, less heat energy is used.

  • Pause water with touch of a button
  • Water temperature stays steady while paused
  • Water automatically shuts off after extended use
  • Push N Flow water saving 1.5 GPM
  • Dual thread 15/16 in.-27M or 55/64 in.-27F
  • Easy to install

Specifications

  • PKG Height (in.)4.83
  • PKG Width (in.)1.90
  • PKG Length (in.)1.17
  • PKG Weight (lb.)0.07
  • OEM BrandUniversal
  • ApplicationSink
  • Product Height(in).1.25
  • Product Width(in).0.80
  • Product Length(in).0.00
  • Product Outer Diameter (in.)0.00
  • Product Inner Diameter (in.)0.00
  • MaterialBrass
  • Product TypeAerator

Step-by-step instructions

A worn out aerator /adapter is a quick fix, as you're about to see. It’s also a great way to reduce your water usage and decrease your water bills. And when it comes to fixing it yourself, you're also about to see you're becoming a DIY expert.

Tools and supplies required: Adjustable Pliers

1
step-1

Turning counterclockwise, unscrew the old Aerator from the Faucet Spout. If your Aerator has been in place for a while, you may need to use Adjustable Pliers to loosen.

2
step-2

You should determine if your Aerator has Female or Male threaded connections before you go to your local home improvement store to find a replacement. If your Aerator or Adapter has threads on the outside, your Aerator is Male. If your Aerator has the threads on the inside, then your Aerator is Female.

Be sure to take your Aerator or Adapter with you to the store to be sure you get the right replacement part. Keep in mind that there are also dual fit Aerators (like the one shown in this image) and Adapters that can fit to either a Male or Female connection.

3
step-3

If not already in place, insert the Washer into the threaded end of the Aerator.

4
step-4

Turning clockwise, hand thread the new Aerator onto the Faucet Spout. Be sure not to overtighten. Finally, turn the water on to ensure there are no leaks.

Reviews

There are no reviews yet.

Be the first to review “1.5 GPM Water Saving Dual Thread EZ Touch Faucet Aerator”

 
X