1.5 GPM Dual Thread Premium Swivel Sprayrator in Brushed Nickel

Product Description

This Danco Dual Thread Swivel Sprayrator adds air bubbles to the water to give it a softer feel. It also helps to reduce the volume of water that you use. The 360 degree swivel action allows you to focus the water into those hard to reach areas and has 2 spray patterns to choose from; aerated stream and aerated wide spray . The 1.5 GPM water flow is EPA Certified and can save you up to 30% water consumption as compared to the standard 2.2 GPM.

• Saves up to 30% water consumption
• Dual threads will accommodate 15/16 in. – 27 male threads (outside threads) or 55/64 in. – 27 female threads (inside threads)
• 360 degree motion sprayrator
• Double jointed to allow for maximum spray coverage
• Push/Pull feature lets you choose aerated stream or aerated wide spray
• EPA WaterSense Certified
• Dual thread will connect to either male or female faucet
• For kitchen faucets ONLY
• Complies with the reduction of lead in drinking water act
• NSF/ANSI/CAM 61: Q ≤ 1 compliant

Specifications

• PKG Height (in.)4.83
• PKG Width (in.)2.88
• PKG Length (in.)2.35
• PKG Weight (in.)0.33
• Product Height(in).2.50
• Product Width(in).2.10
• OEM BrandUniversal
• MaterialBrass
• Product TypeSpraytator

How to video

Step-by-step instructions

A worn out aerator /adapter is a quick fix, as you're about to see. It’s also a great way to reduce your water usage and decrease your water bills. And when it comes to fixing it yourself, you're also about to see you're becoming a DIY expert. Tools and supplies required: Adjustable Pliers

1

Turning counterclockwise, unscrew the old Aerator from the Faucet Spout. If your Aerator has been in place for a while, you may need to use Adjustable Pliers to loosen.

2

You should determine if your Aerator has Female or Male threaded connections before you go to your local home improvement store to find a replacement. If your Aerator or Adapter has threads on the outside, your Aerator is Male. If your Aerator has the threads on the inside, then your Aerator is Female. Be sure to take your Aerator or Adapter with you to the store to be sure you get the right replacement part. Keep in mind that there are also dual fit Aerators (like the one shown in this image) and Adapters that can fit to either a Male or Female connection.

3

If not already in place, insert the Washer into the threaded end of the Aerator.

4

Turning clockwise, hand thread the new Aerator onto the Faucet Spout. Be sure not to overtighten. Finally, turn the water on to ensure there are no leaks.