First, determine the source of the leak. If water is leaking from underneath the handle onto the counter, the stem of whichever handle is leaking needs to be replaced. If water is dripping from the faucet, turn off the hot wat...
Turning counterclockwise, remove the old Tub Spout. If your Tub Spout has a set screw holding it in place, be sure to remove that prior to rotating the Spout off. If your Tub Spout is hard to remove, you may need to use the end o...
These instructions are meant for traditional flapper style toilets. For other types of toilets, please follow manufacturer directions for installing the appropriate Flush Valve. Turn off the water supply to the Toilet. Flush th...
For this type of Handle, remove the Set Screw with a Screwdriver and then remove the Handle. If you have a Knob Style Handle, remove the Handle Button by prying off with a Screwdriver, then unscrew the Handle Screw and remove the...
Turn off the water supply to the Toilet. Flush the Toilet to drain the water from the Tank.
Turn off the water supply to the Toilet. Unscrew the Float Rod from the top of the Fill Valve. Discard the old Float Rod and Float.
Turn off the water supply to the Sink. Pry the Handle Cap off the Handle to reveal the Set Screw.
Turn off the water supply to the sink. Remove the handle screw with an Allen Wrench, then remove the handle from the Faucet.
Turn off the water supply to Toilet. Flush the Toilet to drain the water. Disconnect the Flapper Chain or Tank Ball Lift Wire from the existing Handle Assembly Lever Arm.
Remove the Handle Button by prying it off with a Flathead Screwdriver. Remove the Handle’s Set Screw with a Phillips Screwdriver by turning in a counterclockwise direction to release the Handle.
Turning counterclockwise, unscrew the old Aerator from the Faucet Spout. If your Aerator has been in place for awhile, you may need to use Adjustable Pliers to loosen.
Remove the Mounting Screws from the old Overflow Plate and remove and discard your old Overflow Plate. But, keep the Screws, as you will use those to attach the new Overflow Plate.
In order to save both money and water, only run your dishwasher and clothes washer for full loads. Also, keep in mind that the permanent press cycle uses an additional 5 gallons of water than a standard cycle, so avoid using this setting and select a more water-efficient one.
Your tip has been sent to us.
Your email address has been added to our list.
Your idea has been sent to us.
Your account information has been sent to your email.
Please enter your product ID number.
Email is required.
Email is invalid.
Username or Password is incorrect.